EldoS | Feel safer!

Software components for data protection, secure storage and transfer

Need Help

Also by EldoS: Callback File System
Create virtual file systems and disks, expose and manage remote data as if they were files on the local disk.
#9105
Posted: 03/03/2009 09:17:57
by wagih emil (Basic support level)
Joined: 03/03/2009
Posts: 22

Hello, I need help on how to deploy and run sshblackbox on windows mobile(simulator),
NOTE:i`m using evaluating version.
thanks
#9107
Posted: 03/03/2009 09:29:12
by Ken Ivanov (EldoS Corp.)

Thank you for your interest in our products.

Please specify the edition you are evaluating (.NET/ActiveX/VCL) and the exact problems you are encountering.
#9108
Posted: 03/03/2009 09:51:47
by Eugene Mayevski (EldoS Corp.)

The deployment to Windows Mobile is not much different from deployment to other platforms. You need to take the assemblies listed below from <SecureBlackbox>\Assemblies\NET_CF10 or <SecureBlackbox>\Assemblies\NET_CF20 (depending on whether you use .NET CF 1.0 or 2.0/3.5 on your device) and copy them to the device and put them near your application executable. Be sure to reference these assemblies (and not desktop assemblies) in the project settings.


Sincerely yours
Eugene Mayevski
#9109
Posted: 03/03/2009 09:52:37
by Eugene Mayevski (EldoS Corp.)

The assemblies you need are

SecureBlackbox.dll
SecureBlackbox.PKI.dll (only if you use SBB 7.0 pre-release)
SecureBlackbox.SSHCommon.dll
SecureBlackbox.SSHClient.dll


Sincerely yours
Eugene Mayevski
#9110
Posted: 03/03/2009 09:58:18
by wagih emil (Basic support level)
Joined: 03/03/2009
Posts: 22

well actually i need the mobile be a server,then i have added all the assemblies to the mobile and they are registered but when i run the program the following error appears "File or assembly name'System.Windows.Forms,Version=2.0.0.0, Culture=neutral,PublicKeyToken=B77A5C561934E089',or one of its dependencies,was not found"
#9113
Posted: 03/03/2009 10:51:21
by Eugene Mayevski (EldoS Corp.)

This is because your application somehow references or loads .NET desktop assemblies and not .NET CF ones. .NET CF assemblies from Microsoft have different version number ( 1.5 for .NET CF 1.0 and I don't know which for .NET CF 2.0). SecureBlackbox assemblies for .NET CF have the same version numbers but they are stored in a different folder (as I mentioned above).


Sincerely yours
Eugene Mayevski
#9114
Posted: 03/03/2009 10:54:55
by wagih emil (Basic support level)
Joined: 03/03/2009
Posts: 22

tell me if i am right
i`ve made a text file containing the assemblies names then copied the assemblies and put them in the windows folder then i ran the executable of the program,the same error appears to me ,i think i`m missing something but i can`t know what is it
#9115
Posted: 03/03/2009 10:59:16
by wagih emil (Basic support level)
Joined: 03/03/2009
Posts: 22

the assemblies i choose are contained in folder named ".net cf"
#9117
Posted: 03/03/2009 11:20:57
by wagih emil (Basic support level)
Joined: 03/03/2009
Posts: 22

should i change the assemblies referenced in the project to the ones of the .net cf
#9118
Posted: 03/03/2009 12:29:18
by Eugene Mayevski (EldoS Corp.)

As I said, your project seems to reference wrong assemblies (either .NET CLR ones or SecureBlackbox ones or both). It doesn't matter what you copy. At the first place it matters what is referenced. If you have a wrong reference, copying right assemblies won't help. But if you have a right reference, then you should also copy right assemblies, of course.


Sincerely yours
Eugene Mayevski
Also by EldoS: MsgConnect
Cross-platform protocol-independent communication framework for building peer-to-peer and client-server applications and middleware components.

Reply

Statistics

Topic viewed 6867 times

Number of guests: 1, registered members: 0, in total hidden: 0




|

Back to top

As of July 15, 2016 EldoS Corporation will operate as a division of /n software inc. For more information, please read the announcement.

Got it!